A brief overview by a Chengdu meltblown fabric production line manufacturer of the precautions that should be observed when operating the production line equipment:
Category: Company News
Release Date: 2020-05-20
Summary: A brief overview by a Chengdu meltblown fabric production line manufacturer: When operating the production line equipment, the following precautions should be observed: Prior to use, verify that the workshop’s power supply lines can accommodate the equipment’s load requirements and that the supply voltage and frequency match the specifications stated in the equipment manual.
A brief overview by a Chengdu meltblown fabric production line manufacturer of the precautions that should be observed when operating the production line equipment:
1. Before operating the equipment, first verify that the workshop’s power supply lines meet the equipment’s load requirements and that the supply voltage and frequency match the equipment’s specified ratings.
2. Regularly inspect all wire connections to ensure they are secure and in good condition, and check for signs of rust or other corrosion.
3. Regularly inspect the assembly of all components to ensure proper fit, check for loose fasteners, and listen for any unusual noises or foreign objects inside the machine housing.
4. Before starting the electric motor, it is mandatory to check whether the reducer in the main drive system has been lubricated with oil. If not, add No. 30 machine oil or gear oil until the level reaches above the specified mark. After 200 hours of operation, the oil should be drained and replaced; thereafter, the oil should be drained and replaced every 2,000 hours of operation.
5. The conveyor belt must be adjusted promptly: A adjusting screw is provided in the tensioning device at one end of the conveyor line. The belt tension is initially set during installation; however, after a period of operation, wear on the rotating components under continuous tensile stress will cause the belt to elongate. In this case, rotating the adjusting screw will restore proper tension, but care must be taken to ensure that the tension is neither too tight nor too loose.
6. Upon completion of each shift’s work, all debris beneath the production line and the main and auxiliary machines shall be thoroughly cleaned to ensure that the equipment remains clean, orderly, and dry, thereby extending its service life.
7. During operation, components must be properly positioned; the introduction of non-assembly items such as paper scraps, fabric pieces, and tools is strictly prohibited to ensure the safe and reliable operation of the production line.
8. Every year of operation, the bearings and bearing housings shall be inspected and cleaned. If any damage is found that renders them unfit for further use, they shall be repaired or replaced immediately, and lubricating grease shall be applied to fill approximately two-thirds of the internal cavity.
Keywords: A brief overview by a Chengdu meltblown fabric production line manufacturer of the precautions that should be observed when operating the production line equipment:
Related Information
Company News
-
A Brief Overview of the Control System Operation for Plastic Pelletizing Production Lines in Chengdu
Time：2018-12-25
-
A brief overview by a Chengdu meltblown fabric production line manufacturer of the precautions that should be observed when operating the production line equipment:
Time：2020-05-20
-
Innovation and Service in Tandem: Sichuan Jingxiong Sunshine’s Double Assurance
Time：2021-04-06
Industry News
-
What effects do the various components of an injection molding machine have?
Time：2018-12-25
-
The die on the production line is delivering material unevenly, resulting in inconsistent sheet thickness. How should this be addressed?
Time：2020-04-16
-
How can scratches and pitting on the surface of PVC foam boards be addressed?
Time：2020-04-16
-
What safety hazards exist during the production of PVC foam boards, and how can they be prevented?
Time：2020-04-16
-
Application of Convex-Point Steel-Plastic Geogrid in Construction
Time：2019-12-16
-
What safety precautions should be observed when operating a plastic shredder?
Time：2020-12-29
-
Plastic Machinery Guides You on How to Buy the PE Granulation Machine You Need
Time：2020-09-28
Phone
Address
Kaizhou New City Industrial Park, Zhongjiang County, Deyang City, Sichuan Province
Website: 300.cn